A Micromotor for the highest professional. Suitable for implants, maxillo-facial surgery and microsurgery procedures. - “Brushless” Micromotor with 200 to 40.000 rpm speed range: simple and practical functioning at every speed/torque option, and selected program - Micromotor with contra angle anti-rotation device. Stainless steel motor case and connection cable can be both subject to several auto-cleavable - 33 settable reductions - Peristaltic pump with easy to fit and remove irrigation houzw with adjustable aperture diameter - Direct access programmable functions: speed, torque, pump, reverse, reducer hand-piece (all parameters in sequential mode) - Possibility to change the operation parameters and opportunity to memorize them - Pneumatic pedal control suitable for operating theatres and sterile environments - Multifunctional pedal control (optional) with reverse direction, on-off pump, start, speed adjustment and working parameter settings - 4 pre-programmed functions and 10 selectable program settings give a total of 40 operating modes - LCD graphic display (Version with 2x16 capitals characters): with blue back-light and white writing - The entire system conforms to EC regulations and is covered by a full guarantee and all risks insurance TECHNICAL DATA - Torque from 5 to 50 Ncm with 1/16 contra angle - Speed with contra-angle 1/16 from 12.5 to 2,500 rpm - Direct switch for pump’s activation - Pump Irrigation liquid flow adjustable from 0 to 100% - Errors auto-diagnostic system - Push button for Reverse use - 4 pre-programmed functions and 10 selectable program settings give a total of 40 operating modes - Available functions: FORA = drilling ALES = finishing IMPL = implant PROT = prosthesis - Contra angle auto-calibration upon machine’s activation - Speed variable through the multifunctional pedal control (available on request) - The machine is supplied with preset modes in terms of programs and functions. All parameters can be modified by operator, as described in the instructions manual Important: once the parameters have been modified, the pre-set mode can only be manually reacquired - Electronic control with re-programmable microprocessor - Power consumption: 170 Va - Weight: Kg. 4,1 - Dimensions: (DxWxH): mm 250x230x125 ACCESSORIES: PNEUMATIC FOOTSWITCH Power source: 230 V – 50/60 Hz Nominal Power Consumption: 170 Va Rpm: 200 min – 40.000 max with red. 1/1 Hydraulic circuit capacity: 0 ÷ 50 ml max
A Micromotor for the highest professional. Suitable for implants, maxillo-facial surgery and microsurgery procedures. - “Brushless” Micromotor with 200 to 40.000 rpm speed range: simple and practical functioning at every speed/torque option, and selected program - Micromotor with contra angle anti-rotation device. Stainless steel motor case and connection cable can be both subject to several auto-cleavable - 33 settable reductions - Peristaltic pump with easy to fit and remove irrigation houzw with adjustable aperture diameter - Direct access programmable functions: speed, torque, pump, reverse, reducer hand-piece (all parameters in sequential mode) - Possibility to change the operation parameters and opportunity to memorize them - Pneumatic pedal control suitable for operating theatres and sterile environments - Multifunctional pedal control (optional) with reverse direction, on-off pump, start, speed adjustment and working parameter settings - 4 pre-programmed functions and 10 selectable program settings give a total of 40 operating modes - LCD graphic display (Version with 2x16 capitals characters): with blue back-light and white writing - The entire system conforms to EC regulations and is covered by a full guarantee and all risks insurance TECHNICAL DATA - Torque from 5 to 50 Ncm with 1/16 contra angle - Speed with contra-angle 1/16 from 12.5 to 2,500 rpm - Direct switch for pump’s activation - Pump Irrigation liquid flow adjustable from 0 to 100% - Errors auto-diagnostic system - Push button for Reverse use - 4 pre-programmed functions and 10 selectable program settings give a total of 40 operating modes - Available functions: FORA = drilling ALES = finishing IMPL = implant PROT = prosthesis - Contra angle auto-calibration upon machine’s activation - Speed variable through the multifunctional pedal control (available on request) - The machine is supplied with preset modes in terms of programs and functions. All parameters can be modified by operator, as described in the instructions manual Important: once the parameters have been modified, the pre-set mode can only be manually reacquired - Electronic control with re-programmable microprocessor - Power consumption: 170 Va - Weight: Kg. 4,1 - Dimensions: (DxWxH): mm 250x230x125 ACCESSORIES: PNEUMATIC FOOTSWITCH Power source: 230 V – 50/60 Hz Nominal Power Consumption: 170 Va Rpm: 200 min – 40.000 max with red. 1/1 Hydraulic circuit capacity: 0 ÷ 50 ml max
CODE | PRODUCT NAME | IVA |
---|---|---|
DI 400 | Easybone digital implantology machine 4 programs (without pedal and contra-angle) | 22% |
DI 500 | Easybone digital implantology machine 4 programs (without pedal and contra-angle with light) | 22% |
DI500PV | Multifuncion pedal for Easybone | 22% |
SB400P | Pneumatic pedal for Easybone | 22% |
CI201S | COntra-angle intramatic R=20:1 button type | 22% |
CI201SL | Contra-angle intramatic R=20:1 lever type | 22% |
CI321SNLIGHT | Contra-angle R=32:1 high power with light (fiber) | 22% |
DIIMS | IRRIGATION PIPE FOR EASYBONE | 22% |
Get a Newsletter from Edierre and learn everything about our events and offers.