Print
Invite a Friend
SPHERO BLOCK MICRO
Designed specifically to ensure retention of overdentures It has a device for directing the female component when blocking it in the resin of the prosthesis. The spherical attachment is screwed directly into the implant using the specific hexagona
- Designed specifically to ensure retention of overdentures
- It has a device for directing the female component when blocking it in the resin of the prosthesis.
- The spherical attachment is screwed directly into the implant using the specific hexagonal wrench provided for this purpose.
- The spherical attachment has a diameter of 1.8 mm.
- The pink cap is housed inside the female component (stainless steel container); it has a retaining function and can be replaced in case of wear.
- The retaining caps are of the SOFT type.
- To insert the pink cap use the cap inserter.
- The protective disk is useful for preventing penetration of resin when adapting the prosthesis.
- The directional rings are to be mounted on the fittings under the ball.
- The retaining cap should be mounted on the ball so that it rests against the directional ring The 0° directional ring remains in a fixed position The 7° and 14° rings have to be rotated until the best possible parallel alignment is achieved.
- The directional rings and the protective disk must be removed after applying the retaining cap to the prosthesis.
- Designed specifically to ensure retention of overdentures
- It has a device for directing the female component when blocking it in the resin of the prosthesis.
- The spherical attachment is screwed directly into the implant using the specific hexagonal wrench provided for this purpose.
- The spherical attachment has a diameter of 1.8 mm.
- The pink cap is housed inside the female component (stainless steel container); it has a retaining function and can be replaced in case of wear.
- The retaining caps are of the SOFT type.
- To insert the pink cap use the cap inserter.
- The protective disk is useful for preventing penetration of resin when adapting the prosthesis.
- The directional rings are to be mounted on the fittings under the ball.
- The retaining cap should be mounted on the ball so that it rests against the directional ring The 0° directional ring remains in a fixed position The 7° and 14° rings have to be rotated until the best possible parallel alignment is achieved.
- The directional rings and the protective disk must be removed after applying the retaining cap to the prosthesis.
Material: Grade 5 Titanium
Pink Retentive caps: soft retention
Stainless steel container: INOX AISI 303
Directional rings: three angles of inclination: 0° - 7° - 14°
ø of fixed spherical attachment: 1.8mm, TiN-coated
Pink Retentive caps: soft retention
Stainless steel container: INOX AISI 303
Directional rings: three angles of inclination: 0° - 7° - 14°
ø of fixed spherical attachment: 1.8mm, TiN-coated
| CODE | PRODUCT NAME | DIAMETER MM | TRANSMUCOSAL | NOTES | IVA |
|---|---|---|---|---|---|
| 003EDR3305R | SPHERO BLOCK MICRO | Ø 3.3 | mm 0.5 | complete | 4% |
| 003EDR331R | SPHERO BLOCK MICRO | Ø 3.3 | mm 1.0 | complete | 4% |
| 003EDR332R | SPHERO BLOCK MICRO | Ø 3.3 | mm 2.0 | complete | 4% |
| 003EDR333R | SPHERO BLOCK MICRO | Ø 3.3 | mm 3.0 | complete | 4% |
| 003EDR334R | SPHERO BLOCK MICRO | Ø 3.3 | mm 4.0 | complete | 4% |
| 003EDR335R | SPHERO BLOCK MICRO | Ø 3.3 | mm 5.0 | complete | 4% |
| 003EDR336R | SPHERO BLOCK MICRO | Ø 3.3 | mm 6.0 | complete | 4% |
| 003EDR337R | SPHERO BLOCK MICRO | Ø 3.3 | mm 7.0 | complete | 4% |
| 003EDR37505R | SPHERO BLOCK MICRO | Ø 3.75 | mm.0.5 | complete | 4% |
| 003EDR3751R | SPHERO BLOCK MICRO | Ø 3.75 | mm 1.0 | complete | 4% |
| 003EDR3752R | SPHERO BLOCK MICRO | Ø 3.75 | mm.2,0 | complete | 4% |
| 003EDR3753R | SPHERO BLOCK MICRO | Ø 3.75 | mm 3.0 | complete | 4% |
| 003EDR3754R | SPHERO BLOCK MICRO | Ø 3.75 | mm 4.0 | complete | 4% |
| 003EDR3755R | SPHERO BLOCK MICRO | Ø 3.75 | mm 5.0 | complete | 4% |
| 003EDR3756R | SPHERO BLOCK MICRO | Ø 3.75 | mm 6.0 | complete | 4% |
| 003EDR3757R | SPHERO BLOCK MICRO | Ø 3.75 | mm 7.0 | complete | 4% |
| 003EDR4205R | SPHERO BLOCK MICRO | Ø 4.2 | mm.0.5 | complete | 4% |
| 003EDR421R | SPHERO BLOCK MICRO | Ø 4.2 | mm.1 | complete | 4% |
| 003EDR422R | SPHERO BLOCK MICRO | Ø 4.2 | mm.2,0 | complete | 4% |
| 003EDR423R | SPHERO BLOCK MICRO | Ø 4.2 | mm.3,0 | complete | 4% |
| 003EDR424R | SPHERO BLOCK MICRO | Ø 4.2 | mm.4,0 | complete | 4% |
| 003EDR425R | SPHERO BLOCK MICRO | Ø 4.2 | mm.5,0 | complete | 4% |
| 003EDR426R | SPHERO BLOCK MICRO | Ø 4.2 | mm.6,0 | complete | 4% |
| 003EDR427R | SPHERO BLOCK MICRO | Ø 4.2 | mm.7,0 | complete | 4% |
| 003EDR4505R | SPHERO BLOCK MICRO | Ø 4.5 | mm.0.5 | complete | 4% |
| 003EDR451R | SPHERO BLOCK MICRO | Ø 4.5 | mm.1.0 | complete | 4% |
| 003EDR452R | SPHERO BLOCK MICRO | Ø 4.5 | mm.2.0 | complete | 4% |
| 003EDR453R | SPHERO BLOCK MICRO | Ø 4.5 | mm.3.0 | complete | 4% |
| 003EDR454R | SPHERO BLOCK MICRO | Ø 4.5 | mm.4,0 | complete | 4% |
| 003EDR455R | SPHERO BLOCK MICRO | Ø 4.5 | mm.5,0 | complete | 4% |
| 003EDR456R | SPHERO BLOCK MICRO | Ø 4.5 | mm.6,0 | complete | 4% |
| 003EDR457R | SPHERO BLOCK MICRO | Ø 4.5 | mm.7,0 | complete | 4% |
| 003EDR505R | SPHERO BLOCK MICRO | Ø 5.0 | mm.0.5 | complete | 4% |
| 003EDR51R | SPHERO BLOCK MICRO | Ø 5.0 | mm.1.0 | complete | 4% |
| 003EDR52R | SPHERO BLOCK MICRO | Ø 5.0 | mm.2.0 | complete | 4% |
| 003EDR53R | SPHERO BLOCK MICRO | Ø 5.0 | mm.3.0 | complete | 4% |
| 003EDR54R | SPHERO BLOCK MICRO | Ø 5.0 | mm.4.0 | complete | 4% |
| 003EDR55R | SPHERO BLOCK MICRO | Ø 5.0 | mm.5,0 | complete | 4% |
| 003EDR56R | SPHERO BLOCK MICRO | Ø 5.0 | mm.5.0 | complete | 4% |
| 003EDR57R | SPHERO BLOCK MICRO | Ø 5.0 | mm.7.0 | complete | 4% |
Sign up for Email
Get a Newsletter from Edierre and learn everything about our events and offers.